My sewing juices were so well revived after making my black Sewaholic Belcarra, that it wasn’t long until I had another cut and ready to go.
I saw the main fabric for this top (a printed viscose) on the Minerva Crafts website last summer and was instantly drawn to it with this vision of a Belcarra using some black trim for the cuffs and around the neck, but at £9.99 a metre it is the most expensive fabric I’ve brought so far and back then I was too scared that I would mess it up.
Now I’m trying to be less fearful and get better at embracing mistakes as part of the learning process, so decided to treat myself and I’m very glad I did!
I was rather concerned when I opened the parcel as the fabric felt crisp and stiff, not at all the drapey loveliness that I was expecting from viscose! Thankfully it soften up nicely after a pre wash. Not quite as soft and drapey as the black viscose used in my previous Belcarra (and for the contrast pieces in this one) but it still has enough drape to be suitable for this top.
One slight gripe was that the grid pattern sloped off grain about 30 cm from each selvedge and since I’d only brought a metre I couldn’t avoid using this part. You can see the pattern sloping down more on the left side of this photo, but hopefully wouldn’t have noticed if I didn’t point it out!
Although not a precise grid, I did take care when cutting to try and get the pattern roughly lining up.
After taking my time cutting out, the top came together pretty smoothly. The only additional pattern change I made was to use the bias strip (half and inch narrower than the original pattern one) for a bound neckline instead of as a facing. I really like the solid black cuffs and neck edge and was even brave enough to use black thread as a contrast for the cuff and hem stitching.
I’ll move on to a different pattern next, but I doubt this will be my last Belcarra. I’m already feeling the need for an ivory or cream version for summer…
Despite the warm sunny weather we’ve been having in London, it is time to share some of my knitting with you!
For the past few years most of my knitting has been self drafted, which has meant slow projects and these mittens were no exception.
The mittens were made for a lovely friend of mine who is often doing sweet, thoughtful things for me so I wanted to make her something as a way of giving back. We picked out the yarn at John Lewis (Sirdar Montana double knitting shade 0200), I took a few measurements, she told me the kind of style she liked then I set to work.
I’ve made myself some gloves before which thankfully were about the right size for her so I could use that pattern as a rough base. There was still quite a bit of unpicking and reworking though as I experimented with the shaping and also to get a nice colour distribution since using the yarn as is would have resulted in a much longer green section.
Shamefully I have to admit that these were finished a winter later than intended, but my friend was very patient and grateful when they were finally complete. Their first outing was a walk through the London royal parks on a pretty cold winter day so we warmed up with some yummy hot chocolate after 🙂
After all my recent fitting and toiling, making this Sewaholic Belcarra blouse felt wonderful! I could enjoy taking my time getting a good finish as I knew I’d have a well fitting garment at the end of it.
The black one is actually my fourth Belcarra blouse – I made this third flowery version shortly after my second from a lovely viscose fabric brought on Goldhawk Road.
For the third Belcarra, I used a narrower bias strip and sewed it on using a 3/8 inch seam allowance to make the neckline a little smaller. It doesn’t feel like the neckline actually is any smaller, but I wonder if I had stretched the neckline out a little, so for the fourth version I made sure to stay stitch the neckline as soon as I’d cut out the fabric.
I also had a valuable lesson in paying attention when using scissors near fabric when I snipped some of the sleeve while trimming the french seam. Oops! Luckily, it was only small and near the underarm so just took a little darning and isn’t really visible.
The only niggle I have with the third version is that the fold on the cuffs doesn’t want to lie flat after washing. I suspect this could mean that I didn’t cut the fabric exactly on the bias. Hence for this fourth Belcarra, I really took my time over the cutting.
The fabric for the black Belcarra is my first online fabric purchase – this viscose from Minerva Crafts. It is wonderfully soft and drapey and it comes in twelve other colours so I’ll no doubt be ordering more soon.
I had thought about going for the pin tuck sleeves version since I was using a solid colour, but a plain and simple (but well made) black top was what I really wanted. Perhaps not the most exciting blog make, but a top I am very pleased with and one that should get lots of wear 🙂
Hello! I’ve been quiet on here for a few months now, not because I haven’t been creating, but because I have been in a bit of a creative rut. However, the intention of this blog is to document my creative journey, the good and the bad, so let me fill you in on what I’ve been up to…
After making making a few tops and skirts that I am happy with, I wanted my next project to be a dress. I’m not very keen in the idea of always having to go through the fitting process when using a new pattern, so wanted to make a classic sheath dress that I could then use as a block and adapt into different styles.
McCalls 2401 seemed to fit the bill nicely and I’d brought some lovely needlecord that I thought would work well in the sleeveless slash neck version if I widened the hem a little (as I don’t like skirts that restrict my movement) and added some patch pockets.
Good plan so far, but I then while going through the fitting process I ended up working towards an ever moving target which went something like this:
- Two toiles of the dress, but still struggling with getting it fitting at the back, so converted what I’d done into just a bodice
- Two bodice toiles that were getting there on the fit, but then…
- Decided that I wanted this to now be a general block with sleeves, but adding them in didn’t go at all well as I’d changed the armscye too much (I couldn’t even do the zip up, my arms were so restricted!)
- Somehow I decided that the easiest thing to do would be to switch to the Sewaholic Alma pattern(?!?), but that really just got me back to square one as I had now had not only back, but bust and hip fit issues to contend with again
- Starting to despair with getting a bodice to fit, I changed direction completely and started drafting an A line skirt using the pencil skirt I’d made as a starting point
- This probably went better than I thought at the time but after adding in pockets and creating all the pattern pieces I started having doubts about whether I was really happy enough with the fit and shape to cut into my nice fabric 🙁
Argh! At this point I really started to despair with all the work that felt like it was leading nowhere except a growing collection of toiles (made from old bedding that was going to be thrown out):
I’ve realised I need a reset and the satisfaction of completing something wearable, so have ordered some black viscose and will make another Belcarra as I can go straight to cutting and should have something I’ll actually want to wear soon. Fingers crossed anyway!
Interestingly, Sunni at A Fashionable Stitch has recently written a post that touches on overfitting, I most definitely seem to have fallen into this trap!
Have you ever gotten stuck in a rut like this?